Glass cockpit and panel upgrades by airframe class. Garmin Platinum, Collins and Honeywell.
Piston singles and twins — Cessna, Piper, Cirrus, Bonanza and the rest of the GA line.
King Air, Citation, Hawker, Phenom, PC-12 — G1000 NXi, Pro Line and G5000 programmes.
Robinson, Bell, Airbus Helicopters, MD — G500H TXi and NVG-ready panels.
Displays, navigators, radios, ADS-B, autopilots, traffic, weather, radar altimeters and engine monitors.
Interior, exterior and engine work while your aircraft is with us.
Upholstery, cabin refresh and comfort upgrades under Part 145.
Lighting, coatings, facelift and paint work done in one go.
Piston engine overhaul and exchange from the Moravská Třebová shop.
Seat overhaul and re-trim on the bench under Part 145, then back in the cabin.
Line and base at Kunovice. Component repair on the bench.
Find the fault on the aircraft before the upgrade. G1000, autopilot, antennas, wiring.
Periodic line and base maintenance, pitot-static, transponder MODE S and annual IFR checks at Kunovice.
Part 145 CRO at Veverská Bítýška. Exchange units via the parts shop.
NAV/COMM/XPDR, VSWR, climate chamber, weighing scales, force gauges.
Start a project
Glass, panel, interior or engines. Garmin Platinum, Collins and Honeywell.
Approved design data for your modification.
Major and minor changes, EASA.21J.849.
Minor and major changes as design data.
New products under EASA.AP496.
SATCOM, Wi-Fi, IFE and cabin power.
Ka/Ku and Starlink-class antenna programmes.
Passenger WLAN as a certified change.
In-flight entertainment with the LOPA.
ISPS and USB-A/C passenger power.
Flight-deck and mission systems, by AIR TEAM Engineering.
Flight management upgrades, certified.
In-seat power supply, kit included.
ADS-B Out and In mandates closed.
Camera and sensor mounts, approved.
Installation and interface design.
LOPA, monuments and placards.
A320, B737, ATR and bizjet cabins.
Seats, monuments, recertified cabin.
Lavatory monuments and kits.
Placard sets as approved data.
Livery and markings as approved data.
Livery concepts and paint data.
Registration marks, stripes, livery sets.
Programme phases in their own right.
Post-installation and airworthiness flights.
Green aircraft finished end to end.
EASA 21J
EASA 21J data, then production and hangar in the same group. Design work is handled by our design office, AIR TEAM Engineering in Kaunas.
Part 21G POA — built to your approved data or ours, released with EASA Form 1.
Third-party or existing LOPA data — released under CZ.21G.0075 POA with EASA Form 1.
Our drawing office designs it; production releases it under CZ.21G.0075.
CNC, mill, laser, 3D print, riveting and climate test.
NAV/COMM/XPDR benches, VSWR, climate chamber and force gauges.
NVG-compatible lighting, instruments and legends as a production capability.
Panels, looms, holders and install kits — built to approved data.
CNC-milled avionics panels, engraved, wired, Form 1.
Form-board looms, mil-spec connectors, continuity-tested.
Night-visible legends milled and lit from the released drawing.
EFB and tablet mounts — including type-specific fits such as EC135.
Brackets, looms and hardware packed for the type and station.
Monuments, soft goods and trim — on our design or yours.
EASA-approved cabin parts for Airbus, Boeing, Embraer and bizjet cabins.
Stowage, galleys, bulkheads, wardrobes and cabin joinery to LOPA.
Placard kits, registration marks, stripes and ownership plates — Form 1.
Lavatory upgrade monuments and kits under Part 21G.
Part 21G
Your drawing or ours. Avionics kits, cabin monuments and interior shop — released under CZ.21G.0075.
Glass, NVG and tactical ident/nav on government and special-mission types.
Garmin, Collins and Honeywell glass and FMS for government and special-mission types.
NVIS-compatible cockpit lighting and NVG-ready panels.
Mode 5 transponder and interrogator as a certified airborne change.
Tactical UHF nav — azimuth and DME to a TACAN or VORTAC station.
EGI, M-Code / SAASM-class GPS and anti-jam in contested airspace.
ISR kits on the type you already fly.
EO/IR, radar, AIS and datalink on special-mission aircraft.
Turret, NVG cockpit, searchlights and downlink — specified per type.
Photogrammetry, LiDAR and hyperspectral payloads, certified on the airframe.
PNT on the vehicle. Payloads on the unmanned platform.
Collins NavHub GNSS / APNT for ground and maritime fleets.
Raytheon Landshield CRPA — GNSS anti-jam for land platforms.
Payload, datalink and mission software on larger unmanned platforms.
Detect, track and classify unauthorised drones from the air.
The ISR suite and the pod we design and build.
Touchscreen MCU, mission displays and data routing on the airframe you fly.
Modular ISR pod — EO/IR, IP datalink and relay on GA and ULL airframes.
Sensor, console, PNT or UAS payload as one programme. NATO AQAP 2110.
OEM boxes, serviceable stock and exchange units to order online.
Garmin Platinum Dealer — factory-new avionics and accessories.
Collins Pro Line, radios and mission avionics.
Honeywell avionics, instruments and accessories.
Serviceable units and exchange stock with traceability.
Our pilot-gear brand — headsets, bags, kneeboards and cockpit kit.
PilotStyle passive headset and the pilot helmet with Bose A30.
Flight bags, kneeboards, logbooks and mounts.
Ear seals, mic covers, cables and adapters.
Handheld COM radios, 8.33 kHz.
Our tech, your flight. Experimental, LSA and non-certified aircraft.
COM and transponder antennas for experimental and LSA.
Cabin air vents.
LEMO headset connector installation kit.
Standby power for experimental panels.
Portable 28 V / 50 A ground power.
Shop
OEM avionics, exchange units, PilotStyle and Aerospec, ready to order online.
Who we are, what we are approved to do, and the aircraft we have released.
The group: hangar, drawing office, production, parts.
Part 145, 21J, 21G and AQAP — with the certificate numbers.
Aircraft that already left the hangar — Service, Engineering and Intel.
IP ISR Pod, development centres, test aircraft and EU-funded projects.
Partner with us, join the shop, or get a direct line to it.
Benefits, consignment stock and affiliate codes for schools, shops, distributors and creators.
Open roles in the hangar, engineering and the office.
Aircraft, job, timeline. We route it.
What we are approved to design, maintain and repair — the lists procurement actually asks for.
Type coverage for STCs and major changes. Ask for your aircraft.
Part 145 A1/A2/A3 and C-ratings, with the aircraft types on our approval.
Component ratings C2, C3, C6, C13. Exchange units via the parts shop.
The team
Hangar, drawing office, production — the people who sign it out.
Operating since 2008
Partner status
Selected avionics and mission-system manufacturers
CONTACT
Share what you have in mind. A specialist replies by e-mail within 1 business day.
* Required
We use your details only to handle your enquiry. See our privacy policy.
JavaScript is required to send this form. Email us atairteam@airteam.eu.