Skip to content
Looking for our e-shop? It's now at shop.airteam.euHledáte e-shop? Najdete ho na shop.airteam.eu
Česky

Service division · Veverská Bítýška

Avionics Bench Technician (component repair)

Czech title: Elektronik pro opravy avioniky (laboratoř)

CZK 46,000–64,000 gross per month; CZK 74,000–95,000 at senior level

Location
Masarykovo nám. 354, 664 71 Veverská Bítýška
Contract
Employment (HPP), full-time
Start
By agreement
Workload
Full-time

We reply to every application, usually within two weeks.

A unit comes off an aircraft. You find the failed component, prove it by measurement, repair it and test the unit back to the manufacturer's manual. Our laboratory in Veverská Bítýška, near Brno, repairs BendixKing autopilots, radios and navigation units, instruments, displays, weather radar, ELTs and headsets under EASA Part-145. You don't need an aviation background or a licence: if you repair electronics at component level, we teach you the aviation side.

What you'll work on

  • BendixKing autopilots, including the KFC 275 and KFC 325, with their servos and controllers
  • Comm and nav radios, GPS, transponders and audio panels
  • Instruments: altimeters, attitude and vertical gyros, HSIs and RMIs
  • Displays and EFIS, such as the BendixKing EFS 40/50
  • ART 2000/2100 weather radar
  • ELTs, and Bose and David Clark headsets

What you will do

  • Fault finding: trace a fault to the failed component with an oscilloscope, signal generator, spectrum analyser and the unit's test set, and record what you measured.
  • Repair: replace components, SMD and through-hole, with ESD discipline, using only the parts and data the manual allows.
  • Adjustment and test: set up and test the repaired unit to the manufacturer's component maintenance manual (CMM).
  • Findings and records: write the finding and the work record, so our certifying staff can release the unit with an EASA Form 1.

What we expect

  • Electronics at component level: you repair electronics down to the component: radio, telecom, industrial or military equipment all count. Show us a repair of your own.
  • RF and analogue basics: power supplies, oscillators and PLLs, receivers and transmitters; you know what to measure and why.
  • Soldering and rework: SMD down to 0603 and fine-pitch packages, clean and to standard.
  • Technical English: enough to read a component maintenance manual and explain it in your own words.
  • Discipline: no unapproved part goes into a unit, and an expired calibration means stop.
  • Right to work in the Czech Republic: you are an EU citizen or already have free access to the Czech labour market. From outside the EU, we can employ you in this role through the Czech Qualified Employee programme if you are a citizen of Armenia, Georgia, Kazakhstan, Moldova, Mongolia, Montenegro, North Macedonia, the Philippines, Serbia, Thailand or Ukraine. At senior level, with an engineering degree, we can also employ you on an EU Blue Card.

Nice to have

  • Repair of avionics, radios, radar or test equipment
  • Bench work in an aviation, defence or telecom repair shop
  • IPC-A-610 or IPC-7711/7721 training
  • A military radio or radar technician background
  • Czech or Slovak

What we offer

  • CZK 46,000–64,000 gross per month on a full-time employment contract, by experience; CZK 74,000–95,000 at senior level, for an engineer who brings RF work, radar and new unit types into our capability list
  • Training on the aviation side, step by step with our lead technicians: the manuals, our Part-145 procedures and the test equipment
  • Eight dedicated avionics and instrument workstations, a library of repair manuals and a large stock of service parts
  • Work that goes back into aircraft: every unit you repair flies again

Employee benefits: 5 weeks of vacation and 3 sick days, leisure benefit (Pluxee, MultiSport), meal allowance of 129 CZK. All benefits

About AIR TEAM

AIR TEAM service is an EASA Part-145 maintenance organisation for avionics installation, component repair and aircraft maintenance. The hangar is at Kunovice airport (LKKU); the avionics lab is in Veverská Bítýška, near Brno. Across the group, AIR TEAM has modified more than 100 aircraft for European defence programmes and is developing its own counter-drone system.

The laboratory has eight dedicated avionics and instrument workstations, a deep library of repair manuals and a large stock of service parts. Our lead technicians have repaired avionics for more than fifteen years.

Avionics Bench Technician (component repair)

CZK 46,000–64,000 gross per month; CZK 74,000–95,000 at senior level

Apply now

How to apply

Send a short message through the form with your CV or LinkedIn, and one or two photos of a board or unit from a repair of your own, with a line on what was wrong and how you found it. Tell us your education and, if you are not an EU citizen, your citizenship. The manuals are in English.

Questions about hiring: Lucie Kysučanová, lucie.kysucanova@airteam.eu

Applying from abroad?
  • Service division

    Avionics Contractor, EASA B2 (work orders)

    Monthly estimate CZK 77,000–110,000, priced per work order; you invoice

    As an independent B2 technician on a trade licence, take on avionics installation work orders in our Part-145 hangar, from Garmin GTN Xi upgrades to autopilots and mission systems.

    Location
    Kunovice
    Contract
    Contractor (IČO), per work order
    Start
    Start: By agreement
  • Service division

    Avionics Integration Technician (relocation)

    CZK 57,000–64,000 gross per month; more once you hold an EASA B2 licence

    For avionics technicians and electronics engineers from outside the EU: you plan and prove avionics installations in our Part-145 hangar in Kunovice, from wiring diagrams and as-built records to configuration and tests. Employment contract, and we pay for your EASA Part-66 modules.

    Location
    Kunovice
    Contract
    Employment (HPP), full-time, with a Czech employee card
    Start
    Start: About six months from the offer (work permit)
  • Service division

    Avionics Integration Engineer (senior)

    CZK 74,000–95,000 gross per month, by experience

    For electronics engineers with a degree and years of hands-on avionics: you design and prove avionics installations in our Part-145 hangar in Kunovice, from wiring diagrams and load analysis to test benches and the data our design office needs for approval.

    Location
    Kunovice
    Contract
    Employment (HPP), full-time
    Start
    Start: By agreement; from outside the EU, a few months for the EU Blue Card
  • Marketing division

    Performance & Growth Marketing Specialist / Lead

    Fixed monthly fee CZK 55,000–75,000 for the agreed scope; CZK 75,000–100,000 at lead level; you invoice

    Run our marketing as one system: shop campaigns, promotions, a monthly newsletter and leads for the service, in seven languages, with an AI agent doing the drafting. An aviation background is a must. B2B contract only. You apply with a short assignment instead of a CV.

    Task instead of a CV

    Location
    Veverská Bítýška
    Contract
    B2B contract (IČO)
    Start
    Start: Immediately or by agreement
  • Finance

    Chief Accountant (Czech-speaking)

    CZK 65,000–85,000 gross per month, plus quarterly bonuses

    Own the books of several group companies: month-end and year-end closes, VAT, corporate tax and payroll in Pohoda and Pamica. Czech required; the role page is in Czech.

    Page in Czech

    Location
    Veverská Bítýška
    Contract
    Full-time (HPP)
    Start
    Start: By agreement
  • Production

    Production Technician (Wet Lay-Up, MAV/UAV)

    Wet lay-up and MAV/UAV airframe assembly on site in Moravská Třebová. Start planned for January 2027.

    Location
    Moravská Třebová
    Contract
    By agreement
    Start
    Start: January 2027
  • Design

    CAD Engineer (UAV, CATIA V5)

    CZK 80,000–140,000 per month for the agreed scope, by seniority; you invoice

    CAD for a new defence UAV programme: parts, assemblies and manufacturing drawings in CATIA V5. Remote.

    Location
    Remote
    Contract
    B2B contract (you invoice us)
    Start
    Start: By agreement