Description
The FSG8 is the successor of the wellknown "yellow briquettes" FSG4 and FSG5 and complies with the reduced channelseparation of 8.33kHz . The transmitter and receiver unit of the FSG8 handheld radio is derived from the proven ATR model series. These have been thoroughly redesigned to meet the demanding requirements for a certification as a ground-based handheld VHF transceiver for aeronautical mobile services. The FSG8 has the same housing as its predecessor and is therefore just as robust.
Features
- VHF/AM handheld transceiver for ATC
- 25 kHz / 8.33 kHz channel separation
- 760 / 2278 channels selectable
- Transmit power 1.5 Watt / 5.0 Watt PEP
- Battery indicator
- Robust aluminum die-cast housing
- Side-tone via headphone
- Via accessory jack:
- Connection of battery charger
- external 12 VDC supply
- protected 12 VDC output for special accessory
- additional dyn. microphone 5 to 200 ?
- additional ear/ headphone min. 30 ?
- external PTT key
- Numerous accessories: external microphone, carrying case, charger, 12 VDC supply cable, ...
- Tested acc. to ETSI EN 300676-1/2
- Certification as ground-based VHF hand-held radio transmitter for the VHF aeronautical mobile service pending
Technical Data
- Frequency range: 118,000 … 136,975 MHz
- Channel spacing: 25 kHz / 8.33 kHz
- Mumber of channels: 760 (25 kHz) / 2278 (8,33 kHz)
- Frequency accuracy: ? ± 1 ppm
- RF carrier output: 1,5 Watt / 50? (5,0W PEP) @ 12V typ.
- AF output power: 0,7 Watt / 8? @ 12V
- Sensitivity: < -103 dBm (m=0,3 / 12 dB SINAD)
- AGC range: ? 6 dB/10µV … 10 mV
- Microphone threshold voltage (m=0,85): 1,1 mV
- Supply voltage: 14,0 V … 17,0 V external
- Built-in Battery: NiMH-Akku 12 V / 1,5 Ah nominal
- Operating time: 17 hours @ 40% Rx / 60% standby
- Operating temperature with accupack E51833: -10° C … +55° C / 14°F - 130° F
- Dimensions (without antenna): 209 × 84 × 44,5 mm
- Weight: ca. 810 g / 1,8 lbs
- tested acc. to: ETSI EN 300 676-1 V1.5.2, ETSI EN 300 676-2 V2.1.1