Features
- Navigation Indicator that provides OMNI (VOR) or LOCALIZER (LOC) information along with Glideslope Deviation from Glideslope needle when used with external Glideslope Receiver
- Features internal relay to switch between VOR/LOC and GPS modes (external selector switch required to utilize this function)
- Internally lighted
- Plastic bezel with plastic lens
- Can be used with KN-53 and KNR-630/631/632 nav receivers, KX-155 and KX-170/175 nav/comms
- Can be used with KN-73/75 Glideslope Receivers and Glideslope portions of KGM-681/691 Glideslope/Marker Beacon Receivers and KNR-630/631 NAV/GS/MB receivers
- Similar to KI-208A indicator but DOES include Glideslope Deviation Indication
- Operates on any voltage between 11 to 33.6 volts without an external adapter
- NOTE: Will only interface with KLN-89/89B GPS units not the KLN-90B
Specifications
- Dimensions: 3.25" (83 mm) x 3.25" (83 mm) x 8.0" (203 mm)
- Weight: 1.0 lbs. (0.5 kg)
- Input Impedance: 50K ohms, Nominal
- Nominal Composite Input Level: LOC: 0.33VRMS +-10%; VOR: 0.50VRMS +-10% ARINC phased
- Omni Accuracy: +-2 deg. Max Error, +-1 deg. Typical
- Omni Sensitivity: +-10 deg. off course gives full scale deflection
- Localizer Sensitivity: 4dB tone ratio will give 3 dot scale deflection
- External Load: ARINC Autopilot Deviation (Two 1K loads)
- Input Impedance (GS Meter): 1K ohms +-5%
- Deflection Sensitivity (GS Meter): 150uA +-5% for full scale deflection
- Input Impedance (GS Flag): 1K ohms +-5% minimum
- Deflection Sensitivity (GS Flag): 125uA for flag to leave stop; 260uA maximum for fully concealed flag