BrightLine CS3

The Center Section Three is similar to the CS2, just a bit larger.

This item does not include a Main Handle or Shoulder Strap. If building a custom bag, make sure your order includes one or both.

The Center Section Three offers 3 inches of storage and easily carries 13" laptops, some 14" laptops, tablets as well as documents, folders, clipboards, etc.

This item does not include a Main Handle or Shoulder Strap. If building a custom bag, make sure your order includes one or both.

Note - there are no side pocket mounts on the CS3.

The CS3 is unique because it has a small inner pocket that is accessible from the outside. Notice the blue vertical zipper on the side wall. This pocket it tall enough for eyeglasses, or pencils and pens and markers, etc. This pocket is also accessible from the inside of the compartment.

NOTE: This Center Section opens towards the rear. See the additional image in the GALLERY tab. The CS3 was designed to be a secondary Center Section in a configuration that included the CS4 as the primary Center Section. This means the CS4 has the POCKET CAP FRONT attached to its front surface and the CS4 opens towards the front. Therefore, since the CS3 is attached to the back of the CS4, then the CS3 is set up to open towards the rear. The FLAT CAP REAR will most commonly be attached to the rear surface of the CS3. The point being, that if you use the CS3 by itself, the POCKET CAP FRONT will indeed be attached to the front surface of the CS3, but the opposite surface (the rear surface) is the one that acutally has the cover panel that opens up the compartment and this rear cover panel will typically have the FLAT CAP REAR attached to it.