AeroLEDS SunSpot 46 HX LED Landing/Taxi Light

SunSpot 46 HX Landing Light

Built-in Pulse Mode

Higher color temperature - White

Wide input voltage range (9-30VDC)

Over 40% more light output than the competition

Built-in pulse mode (HX models)

Simple drop-in replacement

Technical Specifications:

Power Consumption: 85W

Voltage Range: 9-40

Lumens: 9,250

Candela: 150,000

Beam Profile: 20' x 20'

Weight: 20 oz

Dimensions: 5.6" x 5.6" x 1.9"

Lens: Polycarbonate

SunSpot 46 HX Landing Lights are designed as an LED drop-in replacement for existing legacy lights. The HX version includes an integrated Pulse or WigWag feature that helps significantly increase recognition in broad daylight and night operations. These features also help avoid midair collisions and bird strikes, while reducing the load on the electrical system by 50%. The SunSpot 46 LX/HX Landing Lights will fit all PAR46 configurations.

Sunspot FAA-PMA/STC Landing and Taxi Lights

Drop-in replacement for PAR36, 46, 27 and 64

Almost twice the light for 1/3 the power!

Huge power savings

Light weight

Less heat

Whiter light - more like daylight

Improved safety with pulse recognition mode

Long life - over 50,000 hours!

FAA certified

Incandescent Bulb Cross Reference for Landing and Taxi Lights

Information:

Available as a drop-in replacement for PAR36, PAR46, PAR27, and PAR64 configurations with several options that are FAA/PMA/STC certified. The AeroLEDs Sunspot Series LED Landing and Taxi Lights consume less power, output more lumens (total light output) and are not affected by vibration compared to incandescent bulbs. These attributes make the SunSpot ideal for use in Experimental, Certified, Commercial, ARFF, and Military aircraft. The HX version includes an integrated Pulse or WigWag feature that helps greatly increase recognition in broad daylight as well as night operation to help avoid midair collisions. Additionally, while in the recognition mode, SunSpot’s draw half the current. The SunSpot series lights are designed to be mounted in the wingtips, leading edge, cowling, or on the landing gear.

Pulse Recognition Mode.

AeroLED lights with pulse mode (or wig-wag mode) greatly improve safety by alternately blinking the left then right light once per second. This dramatically increases your aircraft visibility to prevent both air and ground collisions. At least one 36HX or 46HX series light must be installed to enable pulse mode.