Artex ELT 345

The ARTEX ELT 345 is built to the industry’s most stringent quality management standards to ensure the ELT works the first time, every time. The ARTEX ELT 345 transmits on 406 MHz and 121.5 MHz frequencies while providing position accuracy thanks to the built-in GPS navigational interface. GPS data is embedded within the first emergency transmission and provides Search and Rescue personnel with the aircraft location, within 100 meters, in less than a minute.

The ELT 345 boasts an industry low price for an ELT, providing the same quality and performance on which the ARTEX brand was built.

FAA TSO C126b approved.

The ARTEX ELT 345 provides a quick-and-easy retrofit opportunity with flexible installation options such as a two-wire remote switch that does not require any aircraft power. Because it is a single output ELT, the ELT 345 utilizes the same RF output and only one coax cable to transmit both 406 MHz and 121.5 MHz signals. The built-in navigational interface does not require aircraft power to operate which greatly reduces the cost of installation. The stainless steel mounting bracket has a multiple-hole pattern configuration which makes the replacement of legacy ARTEX ELTs or old ACK, Kannad and AmeriKing ELTs quick and easy.

Specifiacations

• Model: ELT 345
• Operating Frequencies: 406.040 MHz (+/- 1kHz) - Emission Designator 16K0G1D / 121.5 MHz (+/- 6.075 kHz) - Emission Designator 3K20A3X
• Output Power: 406 MHz: 5 W for 24 hours @ -20°C to +55°C, 121.5 MHz: 50 mW for 50 hours @ -20°C to +55°C
• Output Connector: BNC Female
• GPS: Built-in GPS Navigational Interface (NMEA 0183 or RS 232)
• Activation: Automatic via G-Switch by 4.5 ft/sec (2.3 G) or Manual Activation
• Battery: 6 year Lithium (LiMnO2), Replacement Battery Part No. 8322
• Temperature Certified to: Operating: -20°C to +55°C, Storage: -55°C to +85°C
• Self Test Checks: G-Switch Enabled, 406 MHz and 121.5 MHz Power, NAV system, Low Battery
• Remote Control: ON/ARM/TEST
• Weight (with tray): 2.0 lbs (907.19 g)
• Measurements: ELT Transmitter with mounting hardware installed: 6.40 (L) x 2.96 (H) x 3.78” (W) inches (16.26 x 7.52 x 9.60 cm)
• Approvals: Cospas-Sarsat, FAA TSO